Quality Certification:
- UL Listed
- Compliance with ASTM
Overview
Ctube Type A rigid PVC conduit is designed for use with 75°C wiring. And where encased in concrete in trenches outside of buildings, be used with 90°C wiring.
PVC material test: ASTM D1784-20,ASTM D635-18 ASTM D638-14ASTM D256-10,ASTM E1252-98(2013).
In accordance with UL651 Standard.
PVC material which is corrosion resistant.
Impact resistant.
Self-extinguishing
fire resistant.
Smooth interior and outside.
Suitable for underground or above-ground applications.
Standard lengths are 10 feet and 20 feet with a belled end or not. Other lengths can be customized for specific applications.
Tensile Strength | 4000 lbf/in2 (2.76 kN/cm2) |
Extrusion | Fusion |
Water Absorption | ﹤0.50% of Whole Weight After Soak |
Resistance to Crushing | ID≥70% After Test |
Resistance to Impact | Less Than 3 of 1/32 inch Cracks & Tears |
Deflection under Load | ﹤0.25mm (0.010 inch) Deformation |
Fire Rating | UL 94V-0 |
Resistance to Specific Reagents | Less ±2.50% Weight After 60 / 120 Days Soak |
Permanency of Printing | Yes |
Rust & Sunlight Resistant | Yes |
Color | Grey or OEM |
Material | PVC |
Customization Services | Available |
Place of Origin | Dongguan, China |
Shipping | By sea |
Samples | Available |
Length | 10ft or 20ft. |
Information to be marked on conduits,
a) The phrase "rigid PVC conduit,
b) The trade size of the conduit product,
c) The name or trademark of the manufacturer or any other distinctive marking by means of which the organization responsible for the product can be readily identified
d) The date or other dating period of manufacture not exceeding any three consecutive months.
For an elbow the date of manufacture is to be the date that:
1) The conduit is extruded when both extrusion and bending occur at the same location or
2) The elbow was formed, where the conduit is extruded at a different location.
f) All markings shall be repeated at uniform intervals and shall appear at least every 10 feet (3 m), but not less than once, on each straight length of the PVC conduit.
Manufacturing Capability
- Production capacity: 100000 meters per week
- Packaging methods: plastic bags & PE films
Certifications
Size Chart
1. What is your MOQ?
- The MOQ of this product is usually 5000 meters.
2. What is your delivery time?
- It depends on the location. Normally the delivery time is around 15-30 days in North America.
3. What is the shipping port?
- We usually ship the cargo via Shenzhen and Guangzhou.
4. What is your payment term?
- We accept 50%T/T in advance, 50% balance, or 100%L/C.
5. How should I contact you?
- You can contact us by submitting an inquiry form here. → contact us
6. How about the samples?
- Normally we can provide free samples unless you require too many.
OEM Service: Markings, thicknesses and colors of products can be customized.
© 2011-2023 Guangdong Ctube Industry Co., Ltd. All Rights Reserved. | Sitemap